Filter
Top Products
27
T
RANSMISSION
AND
RECEPTION
OPERATIONS
T
O
SEND
A
DOCUMENT
WHAT DOCUMENTS MAY BE USED
Dimensions
• Width min. 148 mm - max. 210 mm
• Length min. 105 mm - max. 600 mm
• Unit weight 70 - 90 gr/m
2
(max. 5 sheets)
For documents of different sizes from those specified above,
photocopy the original onto A4 sheets or another supported
format and send the copy.
NEVER USE
• curled paper
• excessively thin paper
• torn paper
• damp or set paper
• excessively small paper
• crumpled paper
• carbon paper
In addition, in order to avoid damaging your fax machine and
invalidating your guarantee, make sure that the documents
you are to use do not contain:
• staples
• paper clips
• adhesive tape
• correcting liquid or glue that has not yet dried.
In all these cases, photocopy the document and send the
copy.
TO PLACE THE DOCUMENT IN THE ADF
2. Place the document in the auto-
matic document feeder (ADF)
with the side to be sent face down
(A).
Place the document against the
right-hand side of the feeder (B):
see the mark printed on the fax
machine's casing.
3. Once the document has been inserted in the automatic docu-
ment feeder (ADF), the display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: "NORMAL".
important
If you do not perform any operation within about two minutes
of inserting the document in the automatic document feeder
(ADF), the fax machine will automatically unload the docu-
ment from the feeder.
TO ADJUST THE CONTRAST AND RESOLUTION
Before sending a document you can make some ad-
justments on the fax machine so as to optimize the
printing quality.
TO ADJUST THE CONTRAST
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
FAX SET-UP
3. Press the key:
The display shows:
FAX SET-UP
DATE AND TIME
4. Press the keys
until the display shows:
FAX SET-UP
VARIOUS SETT.
5. Press the key:
The display shows:
VARIOUS SETT.
ECM
1
1. Push the paper support exten-
sion in the slot until it clicks into
position.
2
B
A