Filter
Top Products
51
4. Press the keys
until the display shows:
INSTALLATION
DISTINCT. RING
5. Press the key:
The display shows:
DISTINCT. RING
SET OPTION
6. To view the other available option, "DISTINCT. RING -
SET PATTERN", press the keys:
7. To confirm the setting, press the key:
The display shows:
AUTODETECT RING
8. Call the fax machine with the desired frequency so that
the fax machine detects it.
The display shows:
RING DETECTED
At this point you can enable the new ring frequency.
9. To enable the new ring frequency, return to the point at
which the display shows:
DISTINCT. RING
SET OPTION
10. Press the key:
The display shows:
SET OPTION
NO
11. To view the other available option, "SET OPTION -
YES", press the keys:
12. To confirm your choice, press the key:
13. To return the fax machine to its initial stand-by mode,
press the key:
14. If you want to move back one function, press the key:
notE
If the fax machine cannot detect that particular frequency, the
display will show the message "RING NOT DETECT.". At this
point, press the key and repeat the procedure.
4. Press the key:
The display shows the preset volume level, for exam-
ple 4:
RING VOLUME
LEVEL 4
5. To turn the volume up/down, press the keys:
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode,
press the key:
8. If you want to move back one function, press the key:
TO ENABLE/DISABLE RECOGNITION OF THE RING
FREQUENCY
In some countries, local telephone companies offer the
possibility of assigning the same telephone line two
or more numbers, corresponding to different users.
When an incoming call is received, a different ring
frequency will indicate which user is to answer the
call.
This function is extremely useful at home or in small
offices, where the same telephone line is shared by
more than one person.
Your fax machine is capable of "learning" one of
these frequencies (see the procedure that follows).
In this way, when a call with the specific ring frequency
is received, the fax machine (in "PHONE/FAX" and
"TAD/FAX" reception modes) prepares exclusively to
receive a document.
This function is particularly useful when associated
with silent reception in that the fax machine will only
ring if the call is coming from a telephone.
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
INSTALLATION
3. Press the key:
The display shows:
INSTALLATION
STATION NAME