Filter
Top Products
15
Basic operations (continued)
Turning the unit ON and OFF / Exiting
Confirm that the battery or external DC power supply
is firmly connected to the unit. Please refer to the
operation instructions of this unit for the details of
access.
Power ON
After setting the rear POWER switch to ON, press the
front POWER button to turn the unit on.
While the unit is starting up, the startup screen
appears on the LCD panel display.
About one minute later, the main screen appears. The
unit can now be used.
• The unit will automatically shut down if a low-voltage
error occurs. Switch to another, fully charged battery
or use an external DC power supply.
• When the temperature is below the rating
temperature of HDD, the HDD may be damaged.
Please move the unit to a warmer place and do
not use it until the temperature is melt. When the
temperature is above the rating temperature of HDD,
the HDD may be damaged. Please move the unit to
a cooler place and do not use it until the temperature
is melt. (You can check the HDD temperature on the
screen after startup.)
For the rating temperature, refer to the specifications
of each HDD used.
Power OFF
To turn off the power, either press the front POWER
button or the EXIT button on the main screen
displayed after startup, and then press the OFF button
or RESTART button on the shutdown method selection
screen displayed next.
The power is now turned off automatically.
A
B
C
D
A
OFF button
After shutdown is completed, the power is turned
off automatically.
B
RESTART button
After shutdown is completed, the unit is restarted
automatically.
C
OK button
The shutdown method, which was selected on the
shutdown method selection screen, is executed.
D
CANCEL button
The main screen that was displayed previously is
now restored.
Although the front POWER LED goes off, power is still
consumed if the rear POWER switch is not set to OFF.
Also set the rear POWER switch to OFF when the unit
is not used.