Filter
Top Products
24
Copying (continued)
Confirmation after copying
The results of copying can be checked on the copy
confirmation screen displayed after copying is finished.
By pressing the CONFIRM button, the copying is
finished, and when the FINISH button on the copy
state display screen is pressed, a screen on which to
confirm the previewing of the copied data is displayed.
If the YES button is pressed on the confirmation
screen, the EXPLORE screen which displays the
folders and icons on the HDD will appear.
If the NO button is pressed instead, the main screen is
restored.
Once copying starts in manual or auto copy mode, the
sequence of processing is as follows.
The copying state and the progress of each card
displays on the screen.
A
BC
A
Status displays
The meaning of the status indicated is described
below.
● Copying
The contents are being copied to this destination.
● Waiting
Copy standby state.
● Verifying
State in which copying is completed and the data
on the HDD is being compared with the data on
the P2 card.
● NS
The destination is not selected now.
● NC
No card inserted.
B
FINISH button
Enter the completion of the copying process.
C
CANCEL button
Cancel copying in progress.
• If copying is cancelled before completion, all copied
data will be erased.
• Copying cannot be canceled while verifying is
underway.