Filter
Top Products
SETTING SUPPLY OPTIONS
4
This chapter explains how to select the supply type, ribbon, speed,
feed mode, backfeed, print position, supply position, margin
position, separators, and skip index mode.
You may need to set supply options when you change supplies.
The options are listed in the table below.
Option Choices Default
Supply Type Aperture/Die Cut/Black
Mark/Continuous
Die Cut
Ribbon No/Yes Yes
Speed 2.5/4.0/6.0/Default Default
Feed Mode Continuous/On-Demand Continuous
Backfeed Off/On Off
Print Position -99 to +99 0
Supply Position -300 to +300 0
Margin Position -99 to +99 0
Separators No/Yes No
Skip Index No/Yes No
To exit an option without changing the setting, press Escape/Clear.
SUPPLY CONTRAST DEFAULTS
PORT
SETTINGS
MAIN MENU
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH
SETUP SCRIPTS
FLASH
MEMORY
SUPPLY
TYPE
RIBBON SPEED
FEED
MODE
BACK
FEED
POSITIONING SEPARATORS
DIAG.
SKIP
INDEX
Setting Supply Options
4-1