Filter
Top Products
◆
daily if your printer is in an excessively dirty,
hot, or humid environment.
◆
when you see voids or streaking in the print
as shown.
1.
Turn off the printer and open the cover and
printhead assembly.
2.
Remove the label roll and ribbon (when
cleaning the printhead).
3.
Press down on the exit cover tabs to open
the exit cover on the front of the printer.
4.
Clean the platen roller with a cloth dampened
with water. Turn the platen roller with your
finger and run the cotton swab or dry cloth
across it. Make sure the platen roller is
clean all the way around.
5.
Moisten a cotton swab with isopropyl alcohol. Rub the cotton
swab across the peel bar and remove any build-up.
Voids
Streaks
9-2
Care and Maintenance