Paxar 9800 Series Printer User Manual


 
Connecting the Power Cable
The power supply automatically switches between 115V or 230V.
No operator settings are required.
1.
Plug the power cable into the socket. Plug the other end of
the cable into a grounded electrical outlet.
2.
Turn on the printer. Press ( I ) to turn on and ( O ) to turn off
the printer.
Establishing Communications
Before the printer can accept print jobs from the host, you must:
Connect the communication cable to the printer and to the
host.
Set the communication values on the printer to match those at
the host. (Only required if you are using the serial port.)
Make sure the printer is off before connecting the cable to the
communication port.
Ask your System
Administrator which
method you will use to
communicate with the
host:
Serial Communication
9 to 25 pin cable
(Part #118364)
25 to 25 pin cable
(Part #118366)
Parallel Communication
IEEE-1284 or Centronics®
mode cable (Part
#118363)
Power Cable
goes here
Parallel Port
Serial Port
Getting Started
1-3