Filter
Top Products
2.
Press Enter/Pause. You will see the current setting, for
example:
PARITY
None
r
3.
Press l or r to display the parity you need, then press
Enter/Pause. Press Escape/Clear until you see the Main
menu.
Flow Control
To change the setting, from the Main menu select Setup, Port
Settings, then Serial Comm.
1.
Press l or r until you see
SERIAL COMM
l
Flow Control
r
2.
Press Enter/Pause. You will see the current setting, for
example:
FLOW CONTROL
l
DTR
r
3.
Press l or r to display the flow control you need, then
press Enter/Pause. Press Escape/Clear until you see the
Main menu.
XON is 17; XOFF is 19. Set flow control to DTR for PC
computers (unless you have XON/XOFF software).
5-4
Communication Values