Filter
Top Products
If the printer will be unused for extended
periods of time, we recommend leaving the
printhead unlatched.
On-Demand Mode Printing
When the 9825 printer is operating in the on-demand mode, the
next label prints when the previous label is removed from the
printer or when Feed/Cut is pressed. The display shows "Printing
X of Y" until all the labels in the batch are printed.
If you have purchased the optional peel module, you must use
on-demand printing with peel mode. If you are using peel mode,
remove the excess backing paper by pulling up across the
saw-toothed tear edge. Make sure the backing paper tears at the
edge. Hold the leading edge of peeled labels when printing on
stock longer than six inches. The minimum feed length for peel
mode is 1.5 inches. You must use non-perforated supplies for
peel mode. The maximum speed for peel mode is 8.0 ips.
We recommend using 0.5-inch gap supplies in
peel mode when backfeed is disabled.
Printing an Error Label
If the printer displays a data error (errors
0-499), press Feed to print an error label
and continue printing. See your System
Administrator about the error label.
8-2
Printing