Filter
Top Products
The parallel communication values are listed in the table below.
Option Choices Default
Port External/Internal External
Mode Compatible/IEEE-1284 Compatible
(Centronics mode)
To change the setting, from the Main menu select Setup, Port
Settings, then Parallel Comm.
1.
Press l or r until you see
PARALLEL COMM
Port
r
2.
Press Enter/Pause. You will see the current setting, for
example:
PORT
External
r
3.
Press Enter/Pause to select the external port. You are now
ready to communicate using an external connection through a
cable or external device, such as the external Ethernet print
server.
5-6
Communication Values