Filter
Top Products
To change the setting, from the Main menu, select Setup, then
Supply.
1.
Press l or r until you see
SUPPLY
l
Backfeed
r
2.
Press Enter/Pause to set the backfeed option. You will see
the current setting, for example:
BACKFEED
l
On
r
3.
Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main menu.
Positioning
This menu includes selections to change the print, supply, and
margin positions.
Print Position
This function adjusts where data prints vertically on the supply.
Adjust the print if it is too close to the top or bottom of the supply,
or overtypes the pre-printed area. One dot is 0.0049 inch.
◆
If the data is too close to the bottom, increase the number.
◆
If the data is too close to the top, decrease the number.
Changing this setting only affects new
formats sent to the printer.
4-6
Setting Supply Options