Filter
Top Products
Feed Mode
You can use continuous or on-demand printing. On-demand
printing allows you to remove a label before printing the next one.
To change the setting, from the Main menu, select Setup, then
Supply.
1.
Press l or r until you see
SUPPLY
l
Feed Mode
r
2.
Press Enter/Pause to set the feed mode. You will see the
current setting, for example:
FEED MODE
Continuous
r
3.
Press l or r to see the other option. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main menu.
Backfeed
Backfeed works by advancing each printed label to the desired
dispense position. Once that label is removed, the next label to
be printed is backed up underneath the printhead. In continuous
mode, only the last label in the batch is advanced to the dispense
position.
Setting Supply Options
4-5