Filter
Top Products
Batch Separators
A batch separator is an extra tag printed in between batches with
a pinstripe pattern. For non-indexed supply, the batch separator
is always six inches long. The name of the batch is shown on the
batch separator.
Changing this setting only affects new
formats sent to the printer.
To change the setting, from the Main menu, select Setup, then
Supply.
1.
Press l or r until you see
SUPPLY
l
Separators
r
2.
Press Enter/Pause to set the batch separators option. You
will see the current setting, for example:
SEPARATORS
No
r
3.
Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main menu.
Batch Separator
Setting Supply Options
4-11