Pioneer DRM-6NX Network Card User Manual


 
<DRB1239>
16
Basic Installation
Basic System Settings
The PIONEER Network Cache Changer DRM-6NX can
be configured using one of these tools:
÷Web browser - The DRM-6NX web interface is the
preferred administration tool. The Internet address
must be set. See description below.
÷Text editor - The DRM-6NX text files. However, not
all administration tasks can be performed from this
interface. Refer to
"Text Editor
" on page 44.
Accessing the DRM-6NX Web Pages
The DRM-6NX web interface is divided into two parts:
÷The File View page for browsing and accessing files
and folders on the discs. This page is available
to all users.
÷The Administration pages for specifying configu-
ration parameters and access rights. These pages
are intended for the Administrator only.
Access the DRM-6NX from a standard Web browser
such as Netscape Navigator or MS Internet Explorer.
Follow these steps:
1.Start the Web browser
2.Enter the name or Internet address of your DRM-6NX
in the location/address field:
http://< Internet address>
The DRM-6NX Home Page is displayed
All users have full access to this File View page.
From this page, users can display and access the
discs inserted in the Changer according to their
access permissions.
Using BOOTP in UNIX
Follow these steps to use the BOOTP method:
1.Append the following entry to your boot table (typically
/etc/bootptab
):
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<Internet address>:\
:sm=<subnet mask>:gw=<gateway field>
where:
ht
=
ether
for Ethernet,
tr
for Token Ring
vm
=
rfcl048
ha
=The Ethernet or node address, i.e. the
DRM-6NX serial number
ip
=The Internet address of the DRM-6NX
sm
=The subnet mask
gw
=The default router address
Example (Ethernet):
cdserv:ht=ether:vm=rfcl048:\
:ha=00408c110086:ip=192.36.253.80:\
:sm=255.255.255.0:gw=192.36.253.254
2. If necessary, update your host table and alias name
databases as described required by your system
3. Start the BOOTP daemon (if not already running) ,
typically by the command:
bootpd -a
4. Restart the DRM-6NX to download the Internet
address, default-router address and net mask