Filter
Top Products
<DRB1239>
49
Appendix B: Troubleshooting
3.Release the Reset button and wait at least two
seconds (one flash of the Network indicator)
4.Press and hold the Reset button for at least five
seconds until the Network indicator remains
constantly lit
5.Turn off the DRM-6NX then back on again
The factory default setting are now restored.
Reset Button
To restore the default settings using the Reset button:
1.Turn off the DRM-6NX
2.Press and hold the Reset button while you switch on
the DRM-6NX (continue to press the 'Reset' button
until the Network indicator flashes at regular two-
second intervals.
Reset button
The Others
7When some 100Base switching HUBs are used,
Collision LEDs may light at 3-second intervals. This
is normal behavior and may be ignred.
7With some HUBs, the Link LED may not light. Reseat
the cable until this LED light is on.
7If a 'write error on hard drive' mesage is returned
during caching, re-format the drive with a low-level
format (Select Hard Disk on This Server page and
click on the Format button)
7When mulitple external DRM-6324Xs or other Pioneer
6-Discs Changers are connected, you must not insert
multiple magazines at the same time. Please insert
the next magazine after the caching is complete.
7If there are problems when using a Web Browser with
an earlier release than Internet Explorer 3.0x, please
upgrade the Web Browser to IE4.0x or an equivalient.
7Once File Rights (Windows Sharing) of the root
directory are changed to Not Shared, the shared
name is changed to NoName. Only restoring the
factory defaults setting or editing the Root.txt file
will clear this condition. The Root.txt file is found
in the System/VolumeProperties folder.