Filter
Top Products
<DRB1239>
9
Panel Facilities
Rear View
SCSI connector
A 50-pin Centronics connector for connecting external
PIONEER CD/DVD-ROM drives (a total of 5 units may be
connected)
NOTE:
÷
Do not connect a CD-ROM or DVD-ROM drive other than a Pioneer
drive to the SCSI terminal on the rear panel
÷
Do not connect this terminal to a SCSI terminal on a PC as this
could cause malfunction or breakdown
“SCSI CONNECTION FOR PIONEER CD-ROM/DVD-ROM
DRIVE ONLY. DO NOT CONNECT SCSI CONTROLLER.”
÷
Assign a SCSI ID (between 2 to 6) for all connected drives.
SCSI ID 0, 1 and 7 are reserved for the internal CD-ROM changer,
hard disk drive and network board. Never assign IDs 0, 1 or 7
to an external drive.
SIGNAL GND
terminal
AC IN socket
Connect to a wall outlet. This unit is designed to operate at AC
110 – 240 V 50/60 Hz. (There is no power supply voltage
switch asswitchover takes place automatically internally)
The accessory power cord is for use in North America. In
order regions, please consult your dealer for information on
Reset button
Press this button to return all settings to their factory defaults
Black cover
The SCSI ID switch of
the internal CD-ROM
changer is inside this
cover. Note that chang-
ing this ID setting may
cause a breakdown. Do
not remove this cover.
FUNCTION switches
Used to set the
operation mode of the
internal CD-ROM
changer. Turn the
power off to the unit
before changing the
operating mode.
1.SCSI terminator switch for internal
CD-ROM changer
It is set to ON (terminator ON) at time of shipment.
Set it to OFF (terminator OFF) when other drives are
to be connected to the SCSI terminal and set the
terminator on the connected drive.
2. RESERVE (for service use only)
Must be set to OFF.
3. Disable magazine eject button
ON: Disables MAGAZINE EJECT button (eject disable)
OFF: Enables MAGAZINE EJECT button (eject enabled)
Ventilators
Ventilation openings protect
the unit from overheating thus
must remain clear and uncovered
Network connector
Connect to the Ethernet or Token Ring network (RJ-45
connector, 100 Base-TX/10 Base-T)