Filter
Top Products
<DRB1239>
33
Accessing the Network Cache Changer Resources
Windows NT 3.x
SMB
For Windows NT 3.x on an SMB client, follow these
steps:
1.Start the File Manager
2.
From the Disk menu, select Connect Network Drive…
3.Double click the entry for the DRM-6NX from the
listing (The default name is PIONEER<nnnnnn>
where <nnnnnn> is the six last digits of the DRM-
6NX serial number)
4.To connect a DRM-6NX resource, select:
÷Root for root level access
÷Volumes for access to all the discs
÷The volume name for access to an individual disc
5.Select a drive letter for your DRM-6NX
6.Check Reconnect at Logon if you wish to use the
resource under the same drive letter the next time
you start your computer
7.If you wish to connect using a different user name,
enter the name in the Connect As box (otherwise,
leave the Connect As box empty)
8.Click OK (The DRM-6NX is now ready for use)
OS/2
IBM Peer for OS/2
Verify that the IBM Peer for OS/2 installed. If it is not,
see the instructions in “
Alternative Method
” on page
34.
1.Double click the OS/2 Peer icon. The Peer window is
displayed:
2.Double click the Sharing and Connecting icon to
open the window shown below:
Any active connections you have will be listed in the
window.
3.From the Connection menu, select Create. The
dialog shown below is displayed:
4.In the Workstation field, type
PIONEER<nnnnnn>
, where
<nnnnnn>
is the last six digits of the DRM-6NX
serial number)
5.In the Share/alias field enter the DRM-6NX resource:
÷For root level access, type
root
÷For Volumes folder access, type
volumes
÷For disc access, type the volume name, (e.g.
44_18881)