Pitney Bowes DI200 Postal Equipment User Manual


 
8
OfficeRight™ DI200
Operators Guide
This chapter explains how to connect and load the machine.
Once you understand the subjects covered in this chapter, you can quickly
set up and use the machine for a variety of jobs as explained later in
Chapter 3,
Running Jobs
.
IMPORTANT: Before running a job, make sure your material meets our
published specifications (see
Specifications
on page 41). This helps
assure reliable operation and greatest productivity.
WARNING! Read all the safety information on page 2
before
connecting
the machine.
Connect the power cord to the socket on the back of the machine.
Plug the power cord into a suitable power outlet. Make sure the power
outlet is near the machine and is easily accessible.
Turn the power switch ON. After a few seconds, the display shows
Ready.
When turned ON, the machine remembers the last job setup, but resets
the item counter back to zero automatically.
Loading
2. PREPARING AND LOADING
Connecting Power and Turning On
02 A5 p1-10 6/16/03, 4:32 PM8