Filter
Top Products
34
OfficeRight™ DI200
Operator’s Guide
Reference
Message Meaning and Action
CHECK SHEET Sheet feeder A2 out of paper, failed to feed or a jam was not
FEEDER A2 cleared successfully from this area. Remove the paper in
sheet feeder A2, reload and start run.
CHECK SHEET The machine has detected a material jam between sheet
FEEDER A2 feeder A2 and the collation area. Open the front cover
LIFT COVER D cover D and remove all material inside. Close frontcover
REMOVE ALL D. Remove material from sheet feeder A2. Reload and
start run.
CLEAR FEEDER This is due to the Manual Feeder M being blocked prior to
M powering the machine up or starting it up. Check that there’s
no material in the feeder. If thereis, remove it and restart.
CLEAR This could be due either to a previous jam not being
STACKER AREA cleared correctly in the stacker area or there is a jam
in the stacker area. Check that stacker area is clear.
Remove any material and resume run.
DOUBLE FEED The machine has detected a double feed from sheet feeder
CHECK FDR A1 A1. Remove the paper in sheet feeder A1, reload and start
run.
DOUBLE FEED The machine has detected a double feed from sheet feeder
CHECK FDR A2 A2. Remove the paper in sheet feeder A2, reload and start
run.
FOLD ONLY Fold only has been selected but no sheets, either
REQUIRES from feeder A1 or A2 (if applicable), have been selected.
SHEETS In this state the indicators for sheet feeder A1 will be red,
not green. Press the sheet feeder selection button until the
required feeder is selected.
05 A5 p33-46 6/16/03, 4:33 PM34