Filter
Top Products
31
OfficeRight™ DI200
Operator’s Guide
Press the
Menu/Enter
button repeatedly
until the screen displays:
Move address
in window?
Press
yes
( ) to enter the function.
The screen displays:
Shift...X
(where X is the current setting)
Set the desired number using the
yes
( ) and
no
( ) buttons. When you
reach the setting you want, press the
Menu/Enter
button to confirm it. This
takes you to the next menu option.
Run another trial piece and check it. If the address is centered in the
window, press
Start
to run your job. If the address is not centered, repeat
the procedure until you get the result you want.
Pressing
no
( ) when you have the option to move the address in the
window takes you to the next menu option.
This option lets you turn the sheet feeder(s) double document detection on
or off.
When turned on…
The machine stops automatically when it senses a double feed (two
sheets feed when only one should). If you’re running a job with individually
addressed inserts, it’s best to turn double detection on.
When turned off…
The machine ignores any double feeds that may occur. You may want to
turn double detection off if you’re running a mail job and it is of little
concern if a mail recipient receives duplicate sheets.
Press the
Menu/Enter
button repeatedly
until the display shows the sheet DD
status:
Sheet DD is On (Off). Change?
Press
yes
( ) to change the sheet
double detect status. The display will confirm the change. Press
no
( ) to
go to the next menu option without changing this setting.
Turn safe seal on/off
Move addressMove address
Move addressMove address
Move address
In window?In window?
In window?In window?
In window?
Shift.. XShift.. X
Shift.. XShift.. X
Shift.. X
Down Down
Down Down
Down
Up Up
Up Up
Up
Sheet DD isSheet DD is
Sheet DD isSheet DD is
Sheet DD is
On. Change?On. Change?
On. Change?On. Change?
On. Change?
The Menu
Sheet Double Detect On/Off
04 A5 p19-32 6/16/03, 4:33 PM31