Pitney Bowes DI200 Postal Equipment User Manual


 
10
OfficeRight™ DI200
Operators Guide
Sheet Feeder A1 is common to all models and is located immediately
below the Manual Feeder M. Sheet Feeder A2 is an option on all models.
It allows the machine to insert a second folded sheet into an envelope.
Both feeders are used for sheets that require folding before inserting.
Load both feeders in exactly the same way.
Always fan (aerate) sheets before you
load them. This prevents them from
sticking together.
Then tap the stack of sheets onto a firm
surface to align the edges.
Place the sheets into Sheet Feeder A1
or A2 as required.
IMPORTANT: Always
load sheets into these
feeders
face down
and
bottom edge first.
The
bottom edge of the
sheet is furthest into the machine.
If youre using both Sheet Feeders A1
and
A2 at the same time, you
must
load
the document printed with the address
into Sheet Feeder A2. If you load the
address-bearing document into Sheet
Feeder A1,
the address wont be visible
in the envelope window.
Slide the back stop in until it just
touches the paper stack.
Loading
Loading the Sheet Feeders (Feeders A1 and A2)
02 A5 p1-10 6/16/03, 4:32 PM10