Filter
Top Products
9
OfficeRight™
DI200
Operator’s Guide
Refill the moistener when the fluid gets low. Check fluid level through the
oval viewing window (figure, below right).
Slide the moistener out to the right.
IMPORTANT: Never open the
moistener while the machine is
processing material.
Carefully fill the moistener with E-Z
Seal
®
solution or water up to the “Max”
mark in the filler funnel.
We recommend E-Z Seal
®
to minimize
algae growth and scale buildup.
Slide the moistener back into the machine.
From the dry state, the moistener will take about five minutes to become
fully wet and ready for use.
Loading
Filling the Moistener
02 A5 p1-10 6/16/03, 4:32 PM9