Filter
Top Products
30
OfficeRight™
DI200
Operator’s Guide
Move the Address in the Window
This menu option allows you to change the length of the fold panel so that
the address is centered in the envelope window. Make this adjustment if
the address in your trial piece appears to be too high or too low in the
window.
Make the adjustment by entering a number from 1 to 9. The
higher
the
number, the
lower
the address will appear in the window.
The Menu
Change Paper Size
Paper: 8-1/2 x 11Paper: 8-1/2 x 11
Paper: 8-1/2 x 11Paper: 8-1/2 x 11
Paper: 8-1/2 x 11
Change Size?Change Size?
Change Size?Change Size?
Change Size?
Paper: 8-1/2 x 14Paper: 8-1/2 x 14
Paper: 8-1/2 x 14Paper: 8-1/2 x 14
Paper: 8-1/2 x 14
Change Size?Change Size?
Change Size?Change Size?
Change Size?
Choose this menu option to select the
paper (sheet) size you want to run. You
can set your OfficeRight™ DI200 to
process letter-size sheets (8-1/2 x 11
inches) or legal-size sheets (8-1/2 x 14
inches).
Press the
Menu/Enter
button repeatedly until the display shows the
current paper size selection:
Paper: 8-1/2 x 11 Change Size?
or
Paper: 8-
1/2 x 14 Change Size?
Press
yes
( ) to change paper size. The display confirms the change.
Press
no
( ) to go to the next menu option without changing the paper
size setting. Press the
Menu/Enter
button repeatedly to go back to the
Ready
screen.
IMPORTANT: Always make sure the sheets you load are
the same size you’ve set the machine to run. If you load the
wrong size sheets, the machine will jam.
Please note that the paper size setting applies to
all
your machine’s sheet
feeders: that is, Sheet Feeder A1; the optional Sheet Feeder A2 (if your
machine is so equipped); and Manual Feeder M.
CAUTION: DO NOT intermix sheet sizes in the same job.
The machine will jam if you attempt to do so.
04 A5 p19-32 6/16/03, 4:33 PM30