Filter
Top Products
33
OfficeRight™
DI200
Operator’s Guide
Message Meaning and Action
CANNOT No sheet feeder has been selected in the job setup. The
SHIFT display automatically times out from this message after
ADDRESS two seconds and moves on to the turn double detect
ON INSERTS On/Off menu function.
CLOSE The machine has detected that the front cover D is open.
COVER D Check that cover D is closed properly.
CLOSE The machine detected that the rear cover E is open.
COVER E Check that cover E is closed properly.
CHECK AREAS Check for an unsuccessful clearance of a jam between
A1 & D the sheet feeder A1 and the collation area. Remove the
paper in sheet feeder A1, open front cover D and check
that the machine is clear of material. Close front cover
D, reload and start run.
CHECK AREAS This could be due to an unsuccessful clearance of a jam
A1, A2 & D between the sheet feeders A1, A2 and the collation area.
Remove the paper in sheet feeders A1, A2, open front
cover D and check that the machine is clear of material.
Close front cover D, reload and start run.
CHECK / CLEAR Inserts failed to feed. Check that the side guides in feeder
INSERT FDR C C are not too tight. Reload feeder C and start run.
CHECK SHEET Sheet feeder A1 out of paper, failed to feed or a jam was not
FEEDER A1 cleared successfully from this area. Remove the paper in
sheet feeder A1, reload and start run.
Reference
5. REFERENCE
Error Messages
05 A5 p33-46 6/16/03, 4:33 PM33