21
OfficeRight™ DI200
Operator’s Guide
Model Required: Your OfficeRight™
DI200
must
have the optional Sheet Feeder A2.
Notes: This job uses the second sheet feeder
A2 in 2nd Page mode to feed two-sheet, collated
sets. Load sheets into the feeder in their collated
sequence: page one, page two, page one, page two and so on.
Step Action Tips For More Details…
1 Make sure paper size Choose 11” or 14” Page 30
setting is correct
2 Load sheets into Load face down Page 10
Sheet Feeder A2. and bottom edge first
See note above for
loading sequence
3 Load envelopes Load right way up Page 11
into Feeder B and facing you
4 Press button to select Make sure BOTH Page 6, 7
Feeder A2 and 2nd green indicators are lit
Page
5 Press button to select Make sure green Page 6, 7
Envelope Fdr B indicator lights
6 Press button to choose Make sure moistener Page 6, 7
Seal or No Seal has E-Z Seal
®
or water
7 Press Trial Piece button Trial piece will not Page 6, 7
and check trial piece seal—this is normal
8 Press Start button Stop button will stop Page 6, 7
to run job machine at end of cycle
Problems? See
Error Messages,
page 33, and
Troubleshooting
, page 37
Job 6
envelope
2 folded sheets
(collated)
Two Collated, Folded Sheets into an
Envelope
04 A5 p19-32 6/16/03, 4:33 PM21