Filter
Top Products
E – 32
Color System
Video Signal Color System Settings
These settings are of the color system of the com-
posite video signal.
This function is normally set to Auto. If the color sys-
tem cannot be identified on Auto, set it manually.
Press the (↑↓) cursor button and align the cursor with
[Color System], then press the SET button.
The color system selection display will appear.
Press the cursor (↑↓) button and align with the com-
posite video signal system of the input equipment.
Picture1
Video Filter
Zoom Filter
ProScan Mode
Gamma
Color System Auto
Picture2 Setup Info.
VIDEO
Option
Auto
NTSC
NTSC4.43
PAL
PALM
PALN
PAL60
SECAM
Note:
* The video signal created by add-
ing the color signal to the bright-
ness signal is termed the com-
posite video signal and differs de-
pending on the country.
The color system sets the method
of this color signal.
* PAL-M cannot be identified au-
tomatically and will need to be set
manually.
Note that when PAL-M and other
color systems are set manually,
the "No Signal" display will not
appear during absence of signal
input.
The background color under such
circumstances will be entirely
black.
Input Video Adjustments [Picture 2]