Filter
Top Products
E – 34
Background
Background Color Settings
This sets the background color when a signal is not
being input to the connector of the projector.
Press the cursor (↑↓) button and align the cursor with
[Background], then make the selection with the cursor
(← →) button.
Blue: Displays a blue screen.
Black: Displays a black screen.
Note: When the menu display is
closed after making the setting, the
color will change to the back-
ground color that has been set.
Setup
Picture1
Keystone Mode Normal Full
Blue Black
+0Keystone
Off On
Off On
- Installation -
Background
Auto Power Off
LED
Picture2 Setup Info.
VIDEO
Option
Auto Power Off
Auto Standby Settings
This setting automatically sets the power to the
standby mode when a no-signal condition has existed
at the connector of the projector for 5 minutes or longer.
Press the cursor (↑↓) button and align the cursor with
[Auto Power Off], then make the selection with the cur-
sor (← →) button.
Off: Not operational
On: Operational
LED
LED Display Settings
This setting is used when the light of the POWER/
STANDBY indicator (LED) of the main unit is objec-
tionable during projection in a dark room.
Press the cursor (↑↓) button and align the cursor with
[LED], then make the selection with the cursor (← →)
button.
Off: Switches off the LED.
On: Lights the LED.
Note:
* The projector will automatically
switch to the standby mode
when the "No Signal" display
has been projected for about 5
minutes.
Some video equipment such as
video tape decks are designed
to display a blue background
when playback has finished. In
this instance, the projector is
receiving a signal and so it does
not produce its own back-
ground.
* To project an image again, press
the ON/STANDBY button and
switch on the power.
Picture1
Keystone Mode Normal Full
Blue Black
+0Keystone
Off On
Off On
- Installation -
Background
Auto Power Off
LED
Picture2 Setup Info.
VIDEO
Option
Picture1
Keystone Mode Normal Full
Blue Black
+0Keystone
Off On
Off On
- Installation -
Background
Auto Power Off
LED
Picture2 Setup Info.
VIDEO
Option
Attention!
When this function is used to switch off the LED and the background color is set to black, the
projector may mistakenly be assumed to be in the standby mode. Do not mistakenly switch
off the main power or disconnect the power cord. Doing so may shorten the life of the lamp
and cause breakdown.