Filter
Top Products
E – 43
Specifications
Model Name HE-3100
Display Method Single Chip Digital Micromirror Device (DMD
TM
)
DMD Panel 0.7"
508,800 pixels (848 x 600)
Lens Manual focus
F=3.0 f=23mm
Lamp 130W High Performance Compact Lamp
Image Size Min. 36" (Throw distance 1.2m / 3.9 feet) Max. 200" (Throw distance 6.9m / 22.6 feet)
Color Reproduction Full color, 16.7 million colors simultaneously
Light Output 450 ANSI lumens (normally white)
Contrast Ratio 700:1 (Full on/off)
Scanning Frequency Horizontal :15 - 85 kHz
Vertical :50 - 85 Hz
Functions Focus(Manual), Projection angle, Source select (Video/S-Video/YcbCr/DVI), Aspect,
Standby On/Off, Projection orientation, Digital keystone correction, Brightness, Contrast, Color,
Tint*
1
, Sharpness, Color temperature, Gamma correction
Digital RGB Input T.M.D.S-compliant (single link only)
Input Terminal DVI-D 24 pin x 1
RGB Signal VGA (640 x 480) enlarged/ SVGA (800 x 600) full, XGA (1024 x 768) compressed
Component Input Component
Y (luminance signal) : 1.0Vp-p/75Ω, Cb, Cr : 0.7Vp-p/75Ω
RCA x 3
Video Input NTSC 3.58, NTSC 4.43, PAL, PAL N, PAL M, PAL60, SECAM
Composite : 1.0Vp-p/75Ω
S-Video : Y (1.0Vp-p/75Ω), C (0.286Vp-p/75Ω)
RCA x 1, 4-pin mini DIN x 1
Horizontal Resolution NTSC: 400 lines or more
Environment Operating temperature: 5 - 35˚C / 41 - 95˚F, 30 - 85% humidity (no-condensing)
Storage temperature: -10 - 60˚C / 14 - 140˚F, 10 - 85% humidity (no-condensing)
Power Requirement 100 - 240V AC, 50 / 60Hz
Power Consumption 200 W (STANDBY 18W)
Dimensions 235 (W) x 91 (H) x 198 (D) mm (not including protrusion)
9.3 (W) x 3.6 (H) x 7.8 (D) inch (not including protrusion)
Weight 2.0kg / 4.4 lbs
Regulations UL Approved (UL 6500, CSA-E60065)
Meets FCC Class B requirements
Meets EMC Directive (EN55022, EN55024)
Meets Low Voltage Directive (EN60065)
*1: Not available on SECAM signal
The specifications are subject to change without notice.
Digital Micromirror Device
TM
(DMD
TM
) by Texas Instruments