Filter
Top Products
E – 36
Resetting, Storing, and Information [Info.]
This function performs resetting and the display of information for the method of
using the user memory, the default values of adjustments and settings, and the
lamp timer.
See → Page E-24 "Using the On-Screen Menu" for information about performing
menu operations.
Picture1
User Memory Save Load
- Default -
- Lamp Timer Reset -
Status : 100 . 500
Lamp Timer: 1 hrs (Total 1 hrs)
Picture2 Setup Info.Option
VIDEO
Preparation
Press the MENU button to display the menu, then select [Info.].
User Memory
Saving and Loading of Video Adjustments
This function saves video adjustment and setting val-
ues, and can load them when required. Saving can
be performed independently for the inputs of VIDEO,
S-VIDEO and YCbCr.
Items that can be saved: Menu items of [Picture 1]
and [Picture 2]
Saving
1. Project the saved image and adjust the menu items of
[Picture 1] and [Picture 2]. The menu can be closed
without causing problems. When closing, select [Info.]
of the menu.
2. Press the cursor (↑↓) button and align the cursor with
[User Memory], then press the cursor (← →) button
and select [Save], finally press the SET button.
3. The message display will change to "Save User Memory."
Press the SET button.
(Press the SET button while the message is displayed.)
This will save the video adjustment and setting val-
ues of the current input mode.
Loading
1. Project the image that you want to save.
2. Press the cursor (↑↓) button and align the cursor with
[User Memory], then press the cursor (← →) button
and select [Load], finally press the SET button.
3.The message display will change to "Load User
Memory." Press the SET button.
(Press the SET button while the message is displayed.)
This will change the image to that of the loaded ad-
justment and setting values.
Picture1
User Memory Save Load
- Default -
- Lamp Timer Reset -
Status : 100 . 500
Lamp Timer: 1 hrs (Total 1 hrs)
Picture2 Setup Info.Option
VIDEO
Picture1
User Memory Save Load
- Default -
- Lamp Timer Reset -
Status : 100 . 500
Lamp Timer: 1 hrs (Total 1 hrs)
Picture2 Setup Info.Option
VIDEO
Save User Memory
Load User Memory
Note:
* User memory is used when you wish to view the same video adjustment
conditions again.
For example, when, for the purpose of movie enjoyment, optimum adjust-
ments are made in fine detail and the image is saved [Save].
Even when adjustments are changed in normal use, the movie can be viewed
with the stored adjustment values when viewing it for full appreciation.
* Saved [Save] adjustment values are stored even when the main power is
switched off or the power cord is disconnected.
Note:
* The [Save] operation overwrites the pre-
vious adjustment values.
* Saving can be performed independently
for each input. In the load operation, the
adjustment and setting values that have
been saved for that input mode are
loaded.