Filter
Top Products
1-- 1
Powerware 9315 Parallel Capacity/Redundant System with PHP SSBM
164201373 Rev. A 092402
n
Getting Started
1.1 Installing the UPS
The Switchboard System Bypass Module (SSBM) and UPMs of the Parall e l
Capacity/Redundant system are shipped on separate pallets. Use a forklift or pallet
jack to move the packaged cabinets to the installation site, or as close as possible
to the site, before unloading from the pallet.
This is the basic sequence of the installation steps:
1. Create an installation plan for the Parallel Capacity/Redundant system
(Chapter 1).
2. Prepare your site for the Parallel Capacity/Redundant system (Chapter 1).
3. Inspect, unpack, and unload the SSBM (Chapter 1).
4. Inspect, unpack, and unload the UPMs (refer to the a pplicable Powerware
9315 Installation manual provided with the UPM).
5. Wire the system (refer to Chapter 2 and the applicable Powerware 9315
Installation manual provided with the UPM).
6. Install features, accessories, and/or options, as applicable (Chapter 3).
7. Complete the Installation Checklist (Chapter 2).
8. Have authorized service personnel perform preliminary operational checks and
startup.
NOTE: Startup a nd operational checks should be performed only by authorized
service personnel. This service is usually offered as part of the sales
contract for your Parallel Capacity/Redundant system.Contactservicein
advance (usually a two week notice is required) to reserve a p referred
startup date.
1.1.1 Creating an Installation Plan
Before beginning to install the P arallel Capacity/Redundant system, read and
understand how this manual applies to the system being installed. Use the
procedures and illustrations in the following chapters to create a logical plan for
installing the s ystem. It is important to note that UPM installation procedures are
contained in t he applicable Powerware 9315 Installation manual provided with the
UPMs. First understand how to install the UPMs before installing the SSBM. The
information in Chapter 2 of this manual provides a guide to installation of the SSBM
to the UPMs.
1