Filter
Top Products
Chapter 5: Management with WebPAM PRO
127
Managing Disk Arrays
Disk Array Management includes the following functions:
• Viewing Disk Arrays (page 127)
• Locating a Disk Array (page 127)
• Creating a Disk Array (page 128)
• Deleting a Disk Array (page 134)
• Viewing Disk Array Information (page 134)
• Making Disk Array Settings (page 135)
• Creating a Logical Drive (page 136)
• Deleting a Logical Drive (page 137)
• Migrating a Disk Array (page 138)
• Rebuilding a Disk Array (page 139)
• Running PDM on a Disk Array (page 140)
• Transitioning a Disk Array (page 141)
• Preparing a Disk Array for Transport (page 141)
Viewing Disk Arrays
To view the disk arrays in this enclosure plus any expanded or cascaded
enclosures:
1. Click the Subsystem icon in Tree View.
2. Click the Disk Arrays icon.
A list of disk arrays appears in Management View.
Click the DA link to view a specific disk array. See “Viewing Disk Array
Information” on page 134.
Locating a Disk Array
Virtual or Third Party Enclosures
Support for this feature depends on how your system or enclosure was set up.
Direct-connect systems with individual LED connections and SGPIO enclosures
support individual physical drive LEDs. Other systems or enclosures might or
might not support them.
To locate a disk array in the enclosure, click the Locate DAx button. The LEDs
for the carriers holding the physical drives used by the disk array will blink for one
minute.