Filter
Top Products
53
Chapter 4: SuperBuild™ Utility
SuperTrak BIOS
This section explains the information that you can obtain from the SuperTrak
BIOS.
When the SuperTrak BIOS loads during bootup, the BIOS displays pertinent
information about the RAID logical drives. At this point, press Ctrl-S to enter the
SuperBuild Configuration Utility.
The SuperTrak BIOS screen displays the following information:
• Summary of Controller – The SuperTrak controller model number.
• Number of Physical Drives – The number of physical drives attached to
this controller.
• Number of Disk Arrays – The number of disk arrays managed by this
controller.
• Number of Logical Drives – The number of logical drives managed by this
controller.
See Figure 1.
• SuperTrak BIOS (below)
• Main Menu (page 56)
• Controller Selection (page 57)
• Controller Information (page 58)
• Physical Drive Management
(page 59)
• Disk Array Management (page 61)
• Logical Drive Management
(page 64)
• Managing Logical Drive Problems
(page 68)
• Spare Drive Management
(page 73)
• Background Activity (page 76)
• Event Log (page 77)
• Time Sync (page 79)
• Miscellaneous (page 80)