SuperTrak EX Series User Manual
80
Miscellaneous
The Miscellaneous menu enables three useful functions on SuperTrak:
• SAS Ready LEDs (page 80)
• SGPIO Backplane (page 80)
• Buzzer (page 80)
SAS Ready LEDs
The LEDs for SAS disk drives stay on continuously to show Ready status, except
when the drive is processing a command. This function enables you to turn the
LEDs off.
To turn the SAS drive LEDs off:
1. In the Main Menu, highlight Miscellaneous and press Enter.
2. Highlight SAS READY LED and press Enter.
3. Highlight your choice and press Enter.
• On – SAS drive LEDs on continuously
• Off – SAS drive LEDs off
SGPIO Backplane
This function enables you to set your SuperTrak card to work your enclosure
management controller through the SGPIO connection.
To choose your enclosure management controller setting:
1. In the Main Menu, highlight Miscellaneous and press Enter.
2. Highlight SGPIO Backplane and press Enter.
3. Highlight your choice and press Enter.
• Generic
• Chenbro
•AIC
• AMI MG9073S
Buzzer
The buzzer sounds to inform you that your RAID system needs attention. But the
buzzer does not specify the condition. When a continuous tone sounds, there are
multiple alarm patterns sounding at the same time.