Filter
Top Products
Chapter 6: Maintenance
177
8. Place a new battery assembly into the cooling unit.
9. Attach the connector on the circuit board.
10. Install the screws holding the battery assembly in place to the cooling unit.
The 2-cell battery assembly has two mounting screws. The 4-cell battery
assembly has only one mounting screw.
11. Place the top section of the cooling unit onto the bottom section and tighten
the thumbscrews.
12. Carefully slide the cooling unit into the enclosure.
13. Gently press the handle in and upward until it locks.
This completes the battery replacement procedure.