Filter
Top Products
VTrak M310p, M210p Product Manual
84
Battery
The Enclosure–Battery tab displays information about the cache backup battery
(or batteries) in the VTrak subsystem enclosure, including:
•Device ID
• Status – Fully Charged is normal
• Remaining Capacity in percent
• Temperature – 40°C or lower is normal
• Reconditioning cycle count
• Voltage – 4000 mV or higher is normal
• Current – A flow of a few mA is normal
Battery Recondition
VTrak automatically reconditions the battery every two months. To set the
recondition schedule, see “Scheduler” on page 51.
To recondition the battery:
1. Click the Subsystem icon in Tree View.
2. Click on the Enclosures icon.
3. Click on the Enclosure icon.
4. Click on the Battery tab in Management View.
5. From the Battery tab dropdown menu, select Recondition.
6. Click the Submit button.
During reconditioning, Battery status can show “discharging” and
“recharging”, and a value will display next to Current. Reconditioning runs in
the background and stops automatically upon completion.
Note
If a battery does not reflect normal conditions and it is not currently
under reconditioning, run the Recondition function before you
replace the battery. During Reconditioning, the battery is fully
discharged then fully recharged. During that time, the controller
cache is reset to Write Thru. If the battery does not maintain
normal values after a Recondition, replace the battery. See
page 175 for more information.