Filter
Top Products
2 – QCP2330/2332
Specifications
2-12 CF2351102-00 F
Q
Table 2-1 lists the values to enter and their corresponding data rates.
2.5
Specifications
Tables 2-2 and 2-3 define the QCP2330/2332 specifications.
Table 2-1. Fibre Channel Data Rates
Value Data Rate
0 One gigabit
1 Two gigabits
2 Auto-negotiated rate
Table 2-2. QCP2330/2332 Board Operating Environment
Environment Minimum Maximum
Operating temperature 0°C/32°F 55°C/131°F
Storage temperature –20°C/–4°F 70°C/158°F
Relative humidity (noncondensing) 10% 90%
Storage humidity (noncondensing) 5% 95%
Table 2-3. QCP2330/2332 Board Specifications
Type Specification
Host bus Conforms to PCI Local Bus Specification, revision 2.1
Fibre Channel
specifications
Bus type: fibre optic media
Bus transfer rate: 200 MBps maximum at half duplex
400 MBps maximum at full duplex
Interface chip: ISP2310 (one in QCP2330; two in QCP2332)
Central
processing unit
(CPU)
Single-chip design that includes a RISC processor, Fibre Channel
protocol manager, DMA controller, and 1-Gb transceivers.
RAM 256K bytes of synchronous SRAM (SSRAM) for each ISP2310
NVRAM 256 bytes for each ISP2310, field programmable
Flash 128K bytes of flash ROM in each ISP2310, field programmable
On-board DMA Three independent DMA channels: two data and one command.
Integrated frame buffer FIFOs (6K-byte receive and 4K-byte transmit)
for each data channel.
Connectors LC-style connector that supports non-OFC, multimode fibre optic
cabling using 2×5 fibre optic transceiver module.
Form factor 16.0cm × 10.0cm (6.3" × 3.9")
Operating power Less than 15 watts