Q-Logic 2300 series Network Card User Manual


 
6 – Solaris SPARC Driver Installation
FCode
CF2351102-00 F 6-5
Q
13. The pkgadd program then installs the SDM library, if selected in step 8. A script
warning is posted, asking whether to continue the installation. For example:
Processing package instance <QLSDMLIB> from
</tmpdir/qla2300_pkg>
QLogic SDM Library
(sparc) Solaris 7-8-9, Rev=X.XX
Copyright (c) 2003, by QLogic Corporation. All rights reserved.
## Processing package information.
## Processing system information.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with
super-user permission during the process of installing this
package.
Do you want to continue with the installation of <QLSDMLIB>
[y,n,?] y
14. Type y and press ENTER to continue the driver installation. The pkgadd
program notifies you when the SDM library installation is complete. For
example:
Installing QLogic SDM Library as <QLSDMLIB>
## Installing part 1 of 1.
/tmp/hba.conf
/usr/lib/libqlsdm.a
/usr/lib/libqlsdm.so
[ verifying class <none> ]
## Executing postinstall script.
Setting up QLSDM library...
Installation of <QLSDMLIB> was successful.
15. Type the following text to reboot and reconfigure the system:
reboot -- -r
16. See the README.TXT file in the Solaris directory (on the SANsurfer
Management Suite CD-ROM or the QLogic web site (www.qlogic.com
)) for
possible modifications to the qla2300.conf, sd.conf, and st.conf files. These
modifications include configuring devices and driver parameters.
6.5
FCode
If you need FCode, see the appropriate section for instructions on how to install or
update the FCode on the QCP/QSB23xx board.