3 – QCP2340/2342
Label
3-14 CF2351102-00 F
Q
3.6
Label
The transceiver on the QCP2340/2342 HBA is a Class I laser product. It complies
with IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be
operated under recommended operating conditions.
3.7
Agency Certification
The following sections contain a summary of the EMC/EMI test specifications
performed on the QCP2340/2342 (CF2310402) to comply with radiated emission,
radiated immunity, and product safety standards.
3.7.1
EMI and EMC Requirements
The QCP2340/2342 conforms to the following requirements:
■ FCC Part 15, Class A
❑ Radiated Emission Class A
❑ Conducted Emission Class A
■ ICES-003, Class A, Industry Canada
■ 89/336/EEC EMC Directive CE
RAM 256K bytes of synchronous SRAM (SSRAM) per RISC
NVRAM 256 bytes, field programmable
Flash 512K bytes of flash ROM, field programmable
On-board
DMA
Three independent DMA channels: two data and one command.
Integrated frame buffer FIFOs (6K-byte receive and 4K-byte transmit)
for each data channel.
Connectors LC-style connector that supports non-OFC, multimode fibre optic cabling
using 2×5 fibre optic transceiver module.
Form factor 16.0cm × 10.0cm (6.3" × 3.9")
Operating
power
Less than 15 watts
Table 3-4. QCP2340/2342 Board Specifications (Continued)
Type Specification
CLASS I LASER PRODUCT