Filter
Top Products
RIC-155 Installation and Operation Manual Chapter 3 Operation
Default Settings 3-3
3.3 Default Settings
RIC-155 is managed by an ASCII terminal or PC running a terminal emulation
program via menu-driven embedded software. Table 3-3 lists the default settings of
the RIC-155 configuration parameters.
Table 3-3. RIC-155 Default Settings
Parameter Default Value
System
Master clock Lbt
Management
System Contact The contact person
System Name RIC-155
System Location The location of this device
Host IP address 0.0.0.0
Host IP mask 0.0.0.0
Host default gateway 0.0.0.0
Read community Public
Write community
Trap community
Telnet access Enable
SNMP access Enable
Web access Enable
Web Trace Refresh 10
Physical port access MNG ONLY
Control Port
Control port rate 9600 bps
POP alarm OFF
Security timeout 10 min
DATA Port (Physical)
Autonegotiation Enable
Flow control Enable
Ethernet mode Full duplex
LAN speed 100 Mbps
MNG Port (Physical)
Autonegotiation Enable