Filter
Top Products
Chapter 4 Configuration RIC-155 Installation and Operation Manual
4-22 Additional Tasks
Transferring Configuration Files
Configuration files can be transferred between the RIC-155 and the host via TFTP.
To upload a configuration file
1. Follow the path: Main menu > File Utilities menu > SW & File Transfer >
Via TFTP.
The Via TFTP menu appears.
2. From the Via TFTP menu, perform the following steps:
Select TFTP File Name and enter the name of the configuration file
The file name field may contain the file name of the user software *.img. Be sure to
insert a different file name and extension so that the software file is not overwritten.
Select TFTP IP Server and enter the IP address of the TFTP server.
3. From the Via TFTP menu, select TFTP Command.
4. From the TFTP Command menu, select Upload Configuration to start
uploading file to the host.
IP parameters of RIC-155 are retained during uploading and downloading of
configuration files.
To download a configuration file
1. Follow the path: Main menu> File Utilities > SW & File Transfer > Via TFTP.
The Via TFTP menu appears.
2. From the Via TFTP menu, perform the following steps:
Select TFTP File Name and enter the name of the configuration file.
The file name field may contain the file name of the user software *.img. Be sure to
insert the configuration file name and extension.
Select TFTP IP Server and enter the IP address of the TFTP server.
3. From the Via TFTP menu, select TFTP Command.
4. From the TFTP Command menu, select Download Configuration to start
downloading file from the host.
Once the download is complete, RIC-155 performs a reset.
IP parameters of RIC-155 are retained during uploading and downloading of
configuration files. If the configuration file is downloaded to a different RIC-155
then change the IP settings to keep them unique (see Configuring the Host
Parameters).
Displaying the Software Version
You can display the information on the software revision of the local or remote
units. The information includes a description of the active program, which is
currently being used by RIC-155, and also details of the backup software.
To display the software version:
• Follow the path: Main Menu > File Utilities > File System >SW.
Note
Note
Note
Note