RAD Data comm RIC-155 Network Card User Manual


 
RIC-155 Installation and Operation Manual Chapter 4 Configuration
Additional Tasks 4-23
The Software Version screen appears (see Figure 4-24).
RIC-155
SW files
Software active version: 1.00
Software active partition: 0
Code size: 190
Date: 28-02-03
Software backup version: 0.00n00
Software backup partition: 1
Code size: 0
Date: 0-0-0
Boot version: 2.20
Boot mng version: 4.00
SW Files Table
ESC-prev.menu; !-main menu; &-exit
Figure 4-24. Software Version Screen
Switching Software Versions
If the active software becomes corrupted, you can switch it with the backup file.
To switch software versions:
1. From the File System menu, select Swap SW Files.
RIC-155 displays the following message:
Request to swap SW files!!! Are you sure? Y/N
2. Type Y to confirm the file swap.
RIC-155 performs the swap and sends the following string:
Program Switching
The active software becomes backup and vice versa. At this stage, RIC-155
is automatically reset.
If you try to switch the software versions when only one version is available,
RIC-155 responds with the following message:
Impossible to switch – no other program
Press any key to continue
Resetting RIC-155
RIC-155 supports two types of reset:
Reset to the default setting
Resetting all parameters
Resetting all parameters, except for master clock and management options
Overall reset of the device.