RAD Data comm RIC-155 Network Card User Manual


 
Chapter 4 Configuration RIC-155 Installation and Operation Manual
4-18 Additional Tasks
Table 4-2. STM-1/OC-3c Port Status Parameters
Parameters Description Values
Uplink Connector
Type
Type of the
STM-1/OC-3c
interface connector
Two BNC – BNC coaxial connector
SC – Fiber optic SC connector
ST – Fiber optic ST connector
FC – Fiber optic FC connector
SF1 – SF1 fiber optic interface
SF2 – SF2 fiber optic interface
SF3 – SF3 fiber optic interface
Section SONET/SDH
section status
Normal – Normal
LOS – Loss of Signal is detected
LOF – Loss of Frame is detected
Line SONET/SDH line
status
Normal – Normal
AIS – Alarm Indication Signal is detected
RDI – Remote Defect Indication is detected
Path SONET/SDH path
status
Normal – Normal
AIS – Alarm Indication Signal is detected
RDI – Remote Defect Indication is detected
LOP – Loss of Pointer is detected
Trace Mismatch – Tx path trace mismatch is detected
Line Indication
Normal – Primary/management link operates properly
Major – A major alarm is detected on the uplink
Minor – A minor alarm is detected on the uplink
4.6 Additional Tasks
Changing the Password
From the User Access menu change current passwords and display the list of users
and their access levels. Currently the following permanent user names are available
(case-sensitive): SU and USER with 1234 as default password.
To change the current password:
1. Follow the path: Configuration > System Configuration > Management >
Management Access > User Access.
The User Access menu is displayed (see Figure 4-21).
2. From the User Access menu, select the following:
Change Password to assign a new password to the existing user name (SU
or USER). Password can contain up to eight characters.