Filter
Top Products
About Your Scanner
15
USING THE BELT CLIP
You can use the belt clip attached
to the back of the scanner for
hands-free carrying when you are
on the go. Slide the belt clip over
your belt or waistband.
TRANSFERRING DATA TO
AND FROM ANOTHER
S
CANNER OR A PC
You can transfer the programmed
data to and from another PRO-95
scanner using a connecting cable
which has
1
/8-inch phone plugs on
both ends (not supplied). Connect
the cable between each scanner's
PC/IF jacks. See “Cloning the
Programmed Data” on Page 53.
You can also upload or download
theprogrammeddatatoorfroma
PC using an optional PC interface
cable (available through your local
RadioShack store) and optional
PC interface software (available at
www.radioshack.com).
ABOUT YOUR
SCANNER
Once you understand a few simple
terms used in this manual and
familiarize yourself with your
scanner's features, you can put
the scanner to work for you. You
simply determine the type of
communications you want to
receive, then set the scanner to
scan them.
A frequency is the receiving signal
location (expressed in kHz or
MHz). To find active frequencies,
you can use the search function.