Filter
Top Products
Trunking
60
PROGRAMMING
M
OTOROLA TRUNKING
S
YSTEM (800 MHZ)
Follow these steps to program 800
MHz band Motorola trunking.
Ô
1. Press PGM then TRUNK to
enter the ID program mode.
2. Press
FUNC then or to
select the desired bank.
3. Press
MODE and select
Motorola trunking mode.
4. Press
FUNC then 3. Use Up/
Down keys to set 800MHz base.
Normal
appears.
5. Press
or to select
Normal or Offset and press
ENTER.
• If you are uncertain about the
base frequency, use the
default setting. The default
setting is
Normal.
• If you cannot receive with the
Normal setting, change to
Offset. The base frequency in
Normal is 851.0125 MHz. The
base frequency in
Offset is
851.0000 MHz.
PROGRAMMING FLEET
M
APS
Youmustsetthefleetmapifyou
want to receive a Motorola Type I
system. Fleet maps are included
along with other information about
Motorola Type I systems at
www.trunkscanner.com.
Follow these steps to program a
fleet map.
Ô NOTE Ô
• On the 800 MHz
trunking band,you
can select a base
frequency (normal
or offset).
• On the 900 MHz
trunking band,you
do not need to set
the base
frequency (base,
offset, step).