Filter
Top Products
Special Features
51
Whenyouturnitoff,
A changes to
“
.”. You cannot set the attenuator
while the scanner is scanning.
Press
FUNC and then ATT to set
the attenuator to its global mode.
Global ATT. appears for 2 seconds
at the bottom line and
a or -
appears. a means the attenuator is
on and
- meansitisoff.PressATT
to turn the attenuator on or off.
ATTon or ATT—appears on the
bottom line while scanning.
Press
FUNC and then ATT again to
turn off the global attenuation
mode.
Normal ATT appears on the
bottom line for about 2 seconds.
Ô
TURNING THE KEY TONE
O
N AND OFF
Each time you press any of the
scanner's keys, the scanner
sounds a tone. To turn the
scanner's key tone off or on:
1. If the scanner is on, turn
VOLUME OFF/MAX
counterclockwise until it clicks
to turn the scanner off.
2. Turn
VOLUME OFF/MAX
clockwise to turn the scanner
on.
Welcome To Dual Trunking
appears.
3. While
Welcome To Dual Trunking
appears, press 1 to turn on
the key tone or
2 to turn it off.
USING THE DISPLAY
B
ACKLIGHT
You can turn on the display's
backlight for easy viewing in dimly
Ô NOTE Ô
Ifyouturnonthe
attenuator, the
scanner might not
receive weak signals
.