Filter
Top Products
Special Features
53
locked. appears when you press
any key after locking the keypad.
To turn off the key lock, press
FUNC then / . The scanner
beeps three times and
Key unlocked
appears.
CHANGING THE DISPLAY
C
ONTRAST
1. Press MANUAL.
2. Press
FUNC then 9. Use Up/
Down keys to set contrast.
appears.
3. Press
or to select the
contrast.
4. Press
ENTER to set the
display contrast.
CLONING THE
P
ROGRAMMED DATA
You can transfer the programmed
data to and from another PRO-95
scanner using an optional
connecting cable with
1
/8-inch
phone plugs on both ends (not
supplied, available at your local
RadioShack store).
Ô
Follow these steps to clone the
data.
1. Turn on both scanners.
2. Connect the connecting cable
to each scanner's
PC/IF jack.
*CLONE MODE* UP to send,
remove cable to exit.
appears.
3. Press
. Confirm send data?
1=YES Press other key for NO.
appears.
Ô NOTE Ô
*CLONE MODE*
Incorrect Model
appears if the
scanner receives
data from another
scanner other than a
PRO-95.