Filter
Top Products
Trunking
66
3. Press
FUNC, or to
move to the desired bank.
4. Press
or to select the
ID memory.
5. Press
L/OUT to lock out the
ID.
L appears.
6. To remove the lockout from a
trunking ID, manually select
the ID memory, and press
L/OUT until L disappears.
You can confirm the ID code while
the scanner shows the text when
the received signal is a voice
channel.
1. Press
TEXT while the scanner
is receiving the voice channel
and indicating the text name.
The ID code appears as
MOT:XXXXXX or ED:XXXX.
2. Press
TEXT again to cancel.
DELAY FUNCTION IN ID
I
NDICATION MODE
You can set the ID delay function
separate from the channel delay.
1. Press
FUNC then ./DELAY
while you are programming
the trunked ID.
Use Up/Down
keys to set ID delay
. 2.0 seconds
appears.
2. Press
or to select None,
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 or
4.0 seconds.
3. Press
ENTER. Ô
Ô
NOTE Ô
When activated, ID
delay watches the
control channel
command for the
delay time when the
signal disappears
from the voice
channel.