Filter
Top Products
Trunking
61
1. Press
PGM then TRUNK.
2. For each bank you want to
program, repeatedly press
FUNC.Then or to
select the bank.
3. Press
FUNC. Then press 8.
Block 0 size code. Use 15 for type
II. S—00
appears.
4. Enter the size code supplied
with the Type I system
information, referring to the
instruction that appears on
the display. If the information
was not supplied, try the
following common fleet maps.
Block Size Code
12345678
0 S11 S4 S4 S12 S4 S3 S10 S1
1 S11 S4 S4 — S4 S10 S10 S1
2 S11 S4 S4 S4 S12 S4 S11 S2
3 S11 S4 S4 S4 — S4 S4 S2
4 S11 S4 S4 S4 S4 S12 S4 S3
5 S11 S4 S4 S4 S4 — S4 S3
6 S11 S4 S12 S4 S4 S12 S4 S4
7 S11 S4 — S4 S4 — S4 S4
9 10 11 12 13 14 15 16
0 S4 S0 S4 S0 S3 S4 S4 S3
1 S4 S0 S0 S0 S3 S3 S4 S10
2 S0 S0 S0 S0 S11 S10 S4 S10
3 S0 S0 S0 S0 S4 S4 S11 S11
4 S0 S0 S0 S0 S4 S4 S11 S0
5 S0 S0 S0 S0 S0 S4 S0 S0
6 S0 S4 S0 S0 S0 S12 S12 S12
7 S0 S4 S0 S4 S0 — — —