Filter
Top Products
Operation
28
quency (including the decimal
point) you want to store.
Ifyoumakeamistake,press
CL todeleteasingledigitor
press and hold
CL about 2
seconds to delete all digits.
4. Press
ENTER to store the
frequency into the channel.
Ô
5. If necessary, press MODE to
change the receiving mode.
6. If desired, program a text tag
for the channel (see
“Assigning a Text Tag to a
Channel” on Page 29).
7. The next channel in sequence
is ready for programming.
Press
PGM and then repeat
steps 3 through 6.
STORING TRUNKING
F
REQUENCIES INTO
C
HANNELS
1. Press PGM and FUNC then
or to select the desired
bank to program.
2. Press
TRUNK to enter into
trunking mode.
3. Repeatedly press
MODE to
select
MOT (Motorola) or ED
(EDACS).
4. Press
PGM and select the
channel number using
or .
5. Enter the UHF trunking
frequency and press
ENTER.
Ô NOTE Ô
• If you made a
mistakeinStep3,
Invalid Freq briefly
appears and the
scanner beeps
when you press
ENTER.Start
again from Step 3
.
• Your scanner
automatically
rounds the
entered frequency
to the nearest
valid frequency.
For example, if
you enter a
frequency of
151.553, your
scanner accepts it
as
151.550.
• After a
transmission, to
have the scanner
pause for 2
seconds on this
channel before
proceeding to the
next active
transmission,
press ./DELAY to
turn the delay
function on. See
“Using the Delay
Function” on
Page 45. The
scanner stores
this setting in the
channel.