Filter
Top Products
Special Features
50
might have to change the receive
mode.
To change the receive mode,
repeatedly press
MODE.The
receive mode changes as follows:
AM — accesses the AM mode
FM — accesses the FM mode
MO — accesses the FM Mode,
Motorola Trunking System (with a
4- or 5-digit ID code)
ED — accesses the FM Mode,
EDACS Trunking System (with
4-digit decimal ID code or 5-digit
AFS code)
Ô
USING THE ATTENUATOR
To reduce interference or noise
caused by strong signals, you can
reduce the scanner's sensitivity to
these signals.
There are two attenuator modes in
your scanner. One is normal
attenuator mode in which you set
the attenuator in each channel or
each band/group in the search
and tune mode. The other is global
mode in which you set the
attenuator only once. This setting
isappliedallthetimeinevery
mode.
Press
ATT to turn on or off the
attenuator while the channel
number is indicated or while the
scanner is searching through
bands/groups. When the
attenuator is on,
A appears at the
seventh digit in the top line.
Ô NOTE Ô
MO (MOT) and ED
modes are not
available when the
scanner tunes up or
down through the
frequency ranges in
which the trunking
operation is not used
.